What Are You Looking For?
Wanan powder coating is a type of coating which includes metal that is applied as a free-flowing, dry powder. The coating is typically applied electrostatically and is then cured under heat to allow it to flow and form a "skin". It is usually used to create a hard finish that is tougher than conventional paint. Powder coating is mainly used for coating of metals.
Brand :
WananMOQ :
100 KGSShelf time :
9 MonthLead time :
7 days-15 daysPlace of Origin :
Fujian,ChinaMain Raw Material :
Epoxy Resin/Polyester ResinAntique bronze powder coating, as well as other shades of this powder, can be used after passing the system of recovery up to 5 times, without losing its structure and color.
They have a rich bright color and shine,antique coating additionally protects the product from corrosion and makes it more wearproof. Even more so: on Antique copper powder coating will have no noticeable traces of rust after long-term use due to the specific color of the painted product.
The structure of Antique allows you to hide the irregularities of the metal, welds, scuffs. It also successfully paints small defects, chips, scratches.
In addition, this powder provides a coating with heat resistance, weather resistance, water resistance, vapor resistance, burn resistance, wear-resistance and fire resistance.
Quick Details
| Appearance | Smooth finish |
| Color | RAL or Pantone or Customization |
| Film Thickness | 80-90μm |
| Curing Condition | 220℃(Object temperature) for 20 minutes |
| Impact Resistance | Direct & Indirect 50kg/cm |
| Pencil Hardness | 2H |
| Flexibility | 6mm Mandrel |
| Salt Spray Test | 5% NaCl Solution for 500 hours - No change |
| Acid Resistance | 5% HCL for 48 hours dip test - No change |
| Alkali Resistance | 5% NaOH for 48 hours dip test - No change |
| Package | Carton packing with PE bag,net weight is 20kg or 25kg each carton. |
Antique powder coating can cause some difficulty for painters. The fact is that the same powder may have different shades on the surface. This is due to the fact that the composition of the paint contains a two-component pigment whose materials do not dissolve into each other. Therefore, it is important to comply with a number of conditions under which the paint will have a constant uniform shade.
First, we emphasize that before painting it is necessary to properly prepare the surface. Without it, any powder paint, not just Antique, will go bad. If there are defects on the surface, such as cracks or scratches, it is necessary to drill it.
Secondly, for qualitative application of this type of paint it is necessary to observe also specific conditions:
The heating mode in the polymerization furnace must always be identical. The faster the heating occurs, the smaller the coating structure becomes.
The corona electrode should have approximately the same voltage. The color of the coating depends on the orientation of the metal particles. And it depends on the voltage. The best voltage for such a powder is 20-25 kV.
The coating layer should be at least 80-100 microns. This will make the structure better visible.
The ratio of fresh powder to that of the recovery system must be at least 3:1.
WHY CHOOSE WANAN
Fujian WANAN Industry Group Co.,Ltd. is a high-tech enterprise which specializing in manufacturing thermosetting powder coating.
Founded in January of 1996 and after more than 27 years developing,we already became one of the top manufacturer which focusing on research,developing manufacturing and sales.
Our powder coatings had gained a great reputations from both home and abroad,we have approved by ISO 9001:2015,ISO 14001:2015,ISO 45001:2018,IATF 16949,CNAS and QUALITOAT.
Our brand stable quality,well coating ability,strong impact resistance,strong adhesion,perfect weather resistance property and large painting area.WANAN brand keep Top 3 in China since 1996.
QUALITY CONTROL
There are certain specific tests for powder coatings and for the cured coating. Once powder coating is delivered to the end user, it can’t be adjusted like a solvent based paint. Therefore extremely strict quality control must be exercised by the powder manufacturer during all stages of the manufacturing process.
FAQ
Q1: Are you factory or trading company?
A1: We are professional powder coating factory with more than 600 employees.
Q2: Where is the location in China?
A2: Our company headquarter is located in ZhangZhou city,Fujian province,China,30mins distance to Xiamen port.
Q3: Can you provide samples for quality checking before place order?
A: Samples are avaliable upon request,but the shipping cost will be bear by customer.
Q4: Is there a discount price?
A: Of course,bigger quantity will be bigger discount.
Q5: How about leadtime?
A:Estimate lead time: About 7-15 working days after payment confirmed.
Q6:Are there powders for interior or exterior use?
A:It is depend on client's requirement.
Q7:How many colors do you have?
A:RAL,Pantone or any customization color is available.
Q8:Do you have any available powder coating stock?
A:Yes we stock more than 400 of popular colors or contact us to order specific color that you need.
Q9:How should I store powder coating well?
A:Store at room temperature(30℃),keep cool,dry and away from direct sunlight.
Wanan powder coating is a type of coating which includes metal that is applied as a free-flowing, dry powder. The coating is typically applied electrostatically and is then cured under heat to allow it to flow and form a "skin". It is usually used to create a hard finish that is tougher than conventional paint. Powder coating is mainly used for coating of metals.
Read More
National Unified Hotline ：
Email Us ：
Company Address ：
Nanshan Jingqu Industrial Park, Xiangcheng District, Zhangzhou City, Fujian Province, China
IPv6 network supported
